Stealth Additive Works Tisha 5.56 Inconel Suppressor, 4.1", Black, 1/2x28

Stealth Additive Works Tisha 5.56 Inconel Suppressor, 4.1", Black, 1/2x28

The Stealth Additive Works Tisha 5.56 Inconel Suppressor is a compact, low-back-pressure K-can engineered for buyers who want substantial signature reduction without placing a long, heavy suppressor at the muzzle. Its 4.1-inch body is manufactured from 718 Inconel and weighs 15 ounces without the mount, giving the Tisha a specialized balance of compact dimensions, hard-use material construction, and mounting flexibility.

This is the Black configuration. This listing is identified by manufacturer SKU Tisha556-Inconel-Black and UPC 762221901619. The suppressor includes a 1/2x28 direct-thread mount and also accepts 1.375x24 HUB-compatible mounting systems, allowing the buyer to begin with a simple direct-thread setup or configure the suppressor around another compatible HUB solution.

Build a compact suppressed rifle without unnecessary muzzle length. Confirm the host barrel threads, projectile diameter, and preferred mounting method, then purchase the Stealth Additive Works Tisha 5.56 from BattleHawk Armory.

Compact 4.1-Inch K-Can Design

The Tisha measures 4.1 inches long without a mount. With the included 1/2x28 direct-thread mount installed, it adds approximately 3.7 inches to barrel length when measured with an assumed 0.7-inch barrel-thread depth. This compact geometry is intended for buyers who prioritize overall handling, storage, maneuverability, and reduced front-end bulk.

A shorter suppressor can be especially attractive on rifles that already use a full-length barrel or on compact hosts where preserving balance is important. Final overall length depends on the specific barrel-thread depth and the mount selected, so the installed dimension should be evaluated as part of the complete host configuration.

718 Inconel Construction

The suppressor body is constructed from 718 Inconel, a high-temperature nickel-based alloy selected for demanding heat and pressure environments. At 15 ounces without the mount, the Inconel Tisha emphasizes durability while remaining compact enough to avoid the excessive length of many full-size suppressors.

The Inconel version is specified to meet or exceed the sound and backpressure performance of the 5.56 Titanium Tisha. That comparison gives buyers a clear reason to choose the Inconel model when material durability and sustained hard-use capability are higher priorities than achieving the lowest possible weight.

Low-Back-Pressure Performance

The Tisha is designed as a low-back-pressure suppressor while maintaining strong muzzle-blast suppression in its compact package. Back pressure is a major consideration for buyers configuring a suppressor for a semiautomatic host because the suppressor becomes part of the firearm's complete gas and operating system.

The Tisha's design is intended to provide compact suppression without relying on the length of a conventional full-size can. Host behavior still varies by barrel length, gas-system configuration, ammunition, buffer system, mount, and firearm condition. Evaluate the suppressor as part of the complete rifle rather than assuming every host will respond identically.

Included 1/2x28 Direct-Thread Mount

A 1/2x28 direct-thread mount is included, providing an immediate mounting solution for a compatible barrel. Direct threading minimizes the number of separate components in the attachment system and gives buyers a straightforward way to install the suppressor when quick-detach capability is not required.

Before installation, verify that the host barrel has clean, concentric 1/2x28 threads and an appropriate shoulder. Confirm bore alignment with the complete suppressor and mount installed. The listed 15-ounce weight and 4.1-inch body length do not include the mount, so final installed weight and length will vary.

1.375x24 HUB Compatibility

The rear interface is compatible with 1.375x24 HUB mounts. This widely used interface gives buyers the option to replace the included direct-thread mount with another compatible HUB adapter or mounting system. HUB compatibility is valuable for customers who already use a preferred muzzle-device ecosystem or want the flexibility to change attachment methods later.

Mount selection affects total weight, added length, blast-chamber clearance, and host compatibility. Verify every component in the mounting system before use and follow the installation instructions for the suppressor, adapter, muzzle device, and firearm.

5.56mm and 6mm-or-Smaller Projectile Compatibility

The Tisha is rated for 5.56mm and other calibers using projectiles 6mm in diameter or smaller. This gives buyers compatibility beyond a single cartridge name while maintaining a clear projectile-diameter limit. Confirm the exact cartridge, projectile diameter, barrel stability, muzzle thread, and host suitability before firing.

Do not use ammunition with a projectile diameter larger than the published limit. Bullet stability and suppressor alignment should be checked on every host, particularly after changing barrels, mounts, muzzle devices, or ammunition.

Black Exterior

The Black exterior gives the suppressor a subdued, traditional appearance that pairs naturally with common black barrels, handguards, and rifle furniture. It is the most neutral option for buyers who want the compact Tisha profile to blend into an existing host setup.

Product Specifications

• Manufacturer: Stealth Additive Works
• Model: Tisha 5.56 Inconel Black
• Manufacturer SKU: Tisha556-Inconel-Black
• UPC: 762221901619
• Caliber Rating: 5.56mm and projectiles 6mm in diameter or smaller
• Material: 718 Inconel
• Color / Finish: Black
• Overall Length: 4.1 inches without mount
• Weight: 15 ounces without mount
• Included Mount: 1/2x28 direct-thread mount
• Mounting Interface: 1.375x24 HUB compatible
• Added Barrel Length: Approximately 3.7 inches with included mount, assuming 0.7-inch barrel-thread depth
• Design Type: Compact low-back-pressure K-can suppressor

Who Is the Tisha 5.56 Built For?

The Tisha is a strong option for buyers who prioritize a compact suppressor envelope, low-back-pressure design, Inconel construction, and the flexibility of both direct-thread and HUB-compatible mounting. It is particularly relevant to users who want to keep the rifle's overall length manageable while retaining a durable suppressor material and a sophisticated mounting architecture.

Customers seeking the lightest possible suppressor may prefer a titanium design, while buyers focused on a compact Inconel body and hard-use material selection will find the Tisha's 15-ounce, 4.1-inch configuration compelling. The included direct-thread mount also reduces the number of separate parts required to begin configuring a compatible host.

Frequently Asked Questions

Does the Tisha 5.56 include a mount?

Yes. It includes a 1/2x28 direct-thread mount.

Is the suppressor HUB compatible?

Yes. The rear interface accepts compatible 1.375x24 HUB mounts.

How much does the Tisha weigh?

The suppressor weighs 15 ounces without a mount. Installed weight depends on the selected mounting system.

How much length does it add to the barrel?

With the included direct-thread mount, it adds approximately 3.7 inches when calculated with an assumed 0.7-inch barrel-thread depth.

What calibers can be used?

It is rated for 5.56mm and other calibers using projectiles 6mm in diameter or smaller. Confirm every host and cartridge before use.

Purchasing a Suppressor from BattleHawk Armory

Suppressor purchases and possession are subject to applicable federal, state, and local requirements. Review BattleHawk Armory's online suppressor purchasing guide before ordering, and confirm that the selected receiving dealer can handle the required transfer.

Get the Stealth Additive Works Tisha 5.56 Inconel Suppressor in Black at BattleHawk Armory. Verify the complete host and mounting setup, then add this compact, high-performance suppressor to your equipment.